logo.gif (1746 bytes)

redball.gif (160 bytes)
clear.gif (799 bytes) b1.gif (274 bytes) b2.gif (256 bytes) b3.gif (294 bytes) b4.gif (350 bytes) b5.gif (320 bytes) b6.gif (311 bytes)

           

clear.gif (799 bytes)


   S A L E S 

clear.gif (799 bytes) clear.gif (51 bytes)



Sales
Specials
Rice
Hy Torq
Used Props
Choosing a Prop
FAQ's
Selecting



Victoria Propeller Ltd.

Retail Outlet

1650 Belford Ave.
Nanaimo, B.C.
V9S 4A9
Canada

Repair Shop
3385 Trans Canada Hwy
Cobble Hill, B.C.
V0R 1L0
Canada


Phone: We take telephone orders and ship anywhere.

Cobble Hill:
Phone 250.743.8151

Fax 250.743.0944
Nanaimo:  
Phone 250.753.9700
Fax 250.753.9743

Call Toll Free:   1.800.665.0616









whiteline.gif (810 bytes)


Propeller Selection Questionnaire
  1. If you do not know all the information, refer to the owner's manual, the actual vessel or contact your dealer. Accurate and complete information is required to make the proper selection
  2. Ideally, all spaces are to be filled in. Items marked with * must be completed.
  3. Our suggestion can only be as good as the information you provide. Inaccurate data will have an effect on the propellers we suggest.
  4. Please note any concerns or performance history in the comments section.
  5. If your inquiry is for the Campbell Sailer Propeller, please direct your inquiry to West By North Enterprises. YOU CAN ACCESS THEIR WEB SITE HERE.
Contact Information:

* Name
Company
Address

City
State / Province
Zip / Postal Code

Country
Phone
Fax
* Email

* Type of Analysis (choose one) :
Inboard Sailboat
Outboard / Sterndrive

* Reason for Analysis

If other, please describe:

Vessel Data:

* Vessel Service
* Hull Type
If other, please describe:

Freshwater Saltwater

* Vessel Manufacturer
Vessel Model
Year
* Loaded weight in lbs.
* Overall Length in feet
Waterline Length in feet
Beam Overall in feet
Hull Draft in feet
(excluding keel)
Vessel Material

Engine Data:
* Engine Manufacturer
* Engine Model
* Engine Year
* Fuel: Gasoline Diesel
* Number of engines
Maximum rated brake horsepower of each
engine *
(We prefer to use the maximum rating as supplied by the engine manufacturer. If we perform the sizing using a rating other than maximum, there can be a danger of overloading the engine)

* Maximum rated RPM

* Gear ratio : 1
Current Propeller Data:

Diameter inches
Pitch inches
Cupping
Number of blades
Condition of prop
Rotation (as veiwed from astern looking forward)
RH (clockwise)

LH (counter clockwise)
Both (right & left hand)
Material
Propeller manufacturer
Propeller model
Bore size

Clearance Geometry:
Distance from shaft centerline to hull (maximum diameter) * inches
Distance from shaft centerline to waterline (immersion) * inches
Current Performance:
This information can only be obtained by running the engine(s) with the current propeller(s). If this is a new or re-powered vessel (never been in the water) enter 'new' in the fields.
* Actual full throttle RPM
* Actual full throttle speed
Knots Mph
* Cruising RPM
* Cruising speed
Knots Mph
Prior Performance:
Please use this section if you have re-powered to a different engine or gear. This information will improve the accuracy and reliability of the analysis. You should enter the information from the old engine and gear combination here. Your new engine and gear combination should be filled in above.
Old engine manufacturer
Old engine model
max rated horsepower
max rated RPM
Old gear ratio : 1
Propeller manufacturer
Propeller model
Propeller diameter inches
Propeller Pitch inches
Cupping
No. of blades
Actual full throttle RPM
Actual full throttle speed
Knots Mph
Comments:

 

 


Make sure you include your correct e-mail address to receive a reply in about 3 days.