Menu
Your Cart

Johnson/Evinrude 14 x 17 BSPro

Johnson/Evinrude 14 x 17 BSPro
Out Of Stock
Johnson/Evinrude 14 x 17 BSPro
Product Views: 9069
$185.68CAD

Size: 14" X 17"

Three blade aluminum propeller.
Thru hub exhaust, for large tube gearcase.
Pressed in rubber bushing with 13 tooth spline.

To fit the following Johnson and Evinrude engines:

E-Tec4 Stroke
40 hp (2004 & newer)60 hp (1998 & newer)
50 hp (2004 & newer)70 hp (1998 & newer)
60 hp (2004 & newer)90 hp (2003 & newer)
75 hp (2004 & newer)115 hp (2003 & newer)
90 hp (2004 & newer)140 hp (2003 & newer)
115 hp (2004 & newer) 
130 hp (2004 & newer) 
  
Others
45 hp 2 cylinder (1986 & newer)75 hp 3 cylinder (1975 - 1984)
50 hp commercial (1977 - 1979)85 hp (1969 - 1980 & 1991 - 1995)
50 hp 2 cylinder (1971 - 1974)88 hp (1981 - 1996)
50 hp 3 cylinder ( 1994 & newer)90 hp (1981 & newer)
55 hp commercial (1980 & newer)100 hp (1979 - 1980 & 1988 - 1993)
55 hp 3 cylinder (1968 - 1969)110 hp (1986 - 1989)
60 hp commercial (1970 - 1971)112 hp (1994 - 1996)
60 hp commercial (1984 & newer)120 hp (1986 - 1994)
65 hp commercial (1984 & newer)125 hp (1971 - 1972)
65 hp 3 cylinder (1972 - 1973)135 hp (1973 - 1976)
70 hp 3 cylinder (1974 & newer)140 hp (1977 - 1994)
  

 

Also fits the following OMC stern drives:
Model 400:Model Cobra:
2.3L 120 hp (thru 1991)2.3L 128 hp (1988 - 1991)
2.5L 120 hp (1978 - 1981)2.5L 120 hp (1985 - 1987)
3.0L 140 hp (thru 1989)3.0L 140 hp (1985 - 1987)



Propeller comes with 1 year warranty against manufacture defects.

Dimensions
Diameter14 inches
Pitch17 inches
RotationRight hand
No. of Blades3
Material
AluminumProprietary grade of cast aluminum, which is more malleable than other propellers. This means the propeller is more likely to bend than break from an impact.
Finish
Powder CoatHigh gloss black
Bore
Rubber Drive HubPressed in rubber drive hub with silicone bronze spindle. 13 tooth spline. Always use a new cotter pin, and always apply grease to the propeller shaft.

Write a review

Note: HTML is not translated!
Bad Good
Captcha